Blue Ox Base Plate Kit Installation - 2007 Saturn Vue- Video
Today on our 2007 Saturn Vue, we're going to take a look at and show you how to install the Blue Ox Base Plate with Removable Arms. Part number is BX3335. Our connection points that this provides are going to give us the perfect solution for being able to haul our car behind our coach and get to our campsite or our destination safely. With a quick pull of the pin and turn, we're going to be able to get those removed. It's going to be pretty inconspicuous at that point. Those we'll be able to place in, that's going to keep out any of that dirt or debris and prevent it from getting inside. more
4/25/2017 10:19:24 AM
Blue Ox Base Plate Kit Installation - 2006 Saturn Vue- Video
Today on our 2006 Saturn Vue, we're going to be taking a look at and installing the Blue Ox Base Plate Kit with removable arms, part number BX3335. Here's what this base plate is going to look like once it's installed. As you can see, this base plate is going to give us a nice, clean look on the vehicle because it's not going to come out very far. It's overall going to be pretty well hidden when not attached to the vehicle. You're going to have your attachment points for your removable arms. You're also going to have your safety chain connection points here, which are going to be nice and easy to access. Our attachment tabs here are going to make it very easy because they're easily accessed, but also with where they sit, since they're about flush with the front of the vehicle, it's going to be very easy to operate our arms with them. more
11/16/2016 11:10:11 AM
Roadmaster Base Plate Installation - 2007 Saturn Vue- Video
Today on our 2007 Saturn Vue well be installing the Roadmaster XL baseplate kit, part number 3121-1. Our first step of our install will be to remove the lower air dam and bumper fascia. To do this well first remove the three nuts securing the hardware here on the passenger side. Keep in mind that each process we do here on the passenger side will keep repeated identically on the drivers side. Next well remove the two pushpin fasteners holding the lower air dam to the wheel well. To remove pushpin fasteners of this style well simply pry out the center of the pushpin and then remove it by simply using a flat bladed screw driver. more
11/15/2012 9:43:12 AM
Roadmaster Base Plate Installation - 2008 Saturn Vue- Video
Today on this 2008 Saturn Vue we are going to be installing Roadmaster Base Plate kit part number 3151-1A. Before we can get to the part where we start installing our base plate kit we need to remove quite a bit of the front end of the vehicle. We are going to start by removing the 11 plastic fasteners which are attaching the radiator cover to the core support in the fascia. To remove these fasteners we need a Phillips head screwdriver and these are plastic Phillips head screws, the center section actually is what is unthreading. Once you get the center section unthreaded, you can remove the entire fastener. 00 :34 more
6/30/2010 5:35:00 AM
Filter Videos
Filter Videos
